DIN 1629 Seamless Steel pipe Of Non Alloys SteelsDIN 1629 Seamless Steel pipe Of Non Alloys Steels are made of unalloyed steels, it's main grades are St 37.0, St44.0, St52.0, Din 1629 seamless steel pipes application fields are: chemical plant, vessels, pipework construction and for common mechanical engineering purposes. Normally DIN 1629 standard are manufactured with no limiting working pressure values. Working temperature is limited below 300℃.
Type of deoxidization
(R, killed (including semi-killed)) (RR,fully killed)
|Chemical Composition, % by mass|
Addition of nitrogen fixing elements
(e.g.not less than 0,020% Al total
Upper Yield Stress ReH
for wall thickness, in mm,
|Symbol||Material Number||up to 16||over 16 up to 40||over 40 up to 65||Longitudinal||Transverse|
|St 37.0||1.0254||235||225||216||350²) to 480||25||23|
|St 44.0||1.0256||275¹)||265¹)||255¹)||420²) to 550||21||19|
|St 52.0||1.0421||355||345||335||500²) to 650||21||19|
¹) For cold f inished tube in the NBK condition (annealed above the upper transformation point under shielding gas or in a vacuum), minimum values of yield stress lower than these valued by 20N/mm² are permitted.
²) For cold finished tubes in the NBK condition, minimum values of tensile strength lower than these values by 10N/mm² are permitted.
- Steel Pipe
- Steel Plate
- Steel Section
- Pipe Fittings